Untitled Document

KY-F70U

The KY-F70U Digital Imaging System interfaces directly to a PC via SCSI-2 and can capture SXGA resolution images directly without an image capture board.
SCSI interface can be switched simply from Siave to Master for connection directly to the SCSI port of a printer without a PC.
SXGA Picture Resolution 1,360 x 1,024
4.35 million effective square- pixels on chip progressive-scan CCD with 1.45 million effectivepixels for each colour.
Live colour preview (VGA) for speed, ease and accuracy.
1/2 inch C-mount to fit on wide variety of lenses and scopes.
3-CCD block with colour separation prism.
1,360 x 1,024 pixel (1,000- TV line) horizontal and vertical resolution.
SCSI-2 interface allows direct digital transfer to PC, and direct control of printer or storage media.
TWAIN drive software for capturing included, and RS-232C camera control software available, allowing easy shooting from PC. 32-bit Windows 98 version currently available.
Built-in 32-bit RISC CPU for faster remote control response.
Combination with additional PC capture boards allows fast function is also possible for single monitor systems.
Up to 3 m umbilical SCSI-2 cord from PC to final termination
External trigger with flash synchronisation.
Picture frames are stored at 8 bits per each R.g.b. colour in uncompressed TIFF form to prevent degradation.
Automatioc Video Level adjustment.
IEC 601-1 approval for medical use (with AA-P700).
Four uncompressed SXGA images may be stored in the internal Frame Memory (about 4.0 Mbytes per picture).
Camera set-up is carried out by on-screen menus which cater for wide range of applications.

SOFTWARE

TWAIN 32 Capture Software (Bundled)
RS-232C CameraControl Software(please contract JVC for download details).

MINUMUM SYSTEM REQUIREMENTS FOR PC

CPU: Pentium 98, Window NT 4.0.
At least 20 MB of RAM
At least 20 MB of available hard-disk space
Serial port (RS-232C)
SCSI-2 board (Adaptec AHA-2940AU recommended)
Colour monitor with 16,770,000- colour recommended
Floppy disc drive
Window 98, Window NT 4.0
TWAIN graphic software such as Adobe Photoshop and Pentium installed
Windows, Windows NT, Adobe Photoshop and Pentium are registered trademarks.

KY-F32E

Standard 1/2" bauonet mount
750 horizontal lines with high sensitivity of F8 at 2,000 lux and minumum illumination of 7.5 lux
Memory function.
Comprehensive input and output terminals
High- Resolution Frame intergration Mode boosts vertical resolution to 480 lines.
Negative video function
Full-time automatic operation.
Menu setup control on camera head and with RS-232C.

KY-F50E

High-performance 3-CCD camera

-Thanks to newly developed 1/3-inch 440,000 pixel CCDs with on chip lens, the KY-F50 delivers a superb, high-quality picture with an S/N ratio of 58 dB and sensitivity as high as 2000 lux at F10. High- precision bonding technology and new circuitry incorporated in the CCD assure horizontal resolution of 700 lines.

Compact, lightweight camera with C mount

-Weighing a mere 870 grams, the KY-F50's remarkably compact, lightweight design has been made possible by the incorporation of a newly developed IC, 2/3- inch optional system.

Comprehensive functions

-Automatic functions including ALC, EEI and FAW.

-Remote control unit (RM-LP55)

Comprehensive signal outputs

-Composite video signal ( D-SUB9-pin, BNC)

-Y/ C443 signal (D-SUB9-pin)

-R/G/B signal (D-SUB9-pin)

-Component signal (D-SUB9-pin)

-Composite sync signal (D-SUB9-pin)

Negative/ positive function

-For special applications such as film shooting.

Dynamic shading compensation function

-Compensates for uneven colour caused by combining the lenses.

High-resolution function enhances vertical resolution
Back focus compatible with 16mm film type lenses.

IEC-601-1 Medical Certificate.

KY-F55BE

C-Mount compatibility
Random Trigger for strobe sychronisation
Slow Shutter for low light image capture
High-resolution Frame Integration Mode
Varible speed electronic shutter
Compact and lightweight
EBU type colour bar generator
Full-time Auto/ Manual White Balance and two Auto White memories.
Enhanced Automatic Level Control (ALC) with Extended Electronic Iris (EEI)
Wide range of video outputs
Auto Internal Sync/ External Sync switching
Flexible camera mountings
RS-232C interface
capability
White shading correction.

KY-F58E

3- CCD RGB prism block, each DDC with 440,000 effective pixels, provides high resolution images.
High sensitivity means that images can be captured over a wide range of lighting conditions.
Complementing the Auto White-Balance function is imtelligent Auto Iris which makes the KY-F58 particularly well-suited to microscopy and other applications which may have irregular reflections.
The CCU features an RGB image memory and framestore which allows capture of a high quality still image.
The KY-F58 has instant connectivity to a wide range of existing optical equipment thanks to its C-mount being a universal standard for lens to camera coupling. The camera head also includes connection for motorized lens control.
An RS-232C port is provided for direct connection to a PC, providing additional remote serial digital control.
The KY-F58 comes standard with a 5-meter umbilical cord between head and CCU. This may be extended to 25-meters.
Memory for up to 16 operator settings (scene files)
Built-in key functions: Shutter iris/Full-time auto white/ Freeze function.
Optional SA-K58SU internal SCSI capture board also available.

TK-1270E

1/2" CCD delivering 460 lines of horizontal resolution
Two video outputs (RGB/ composite video signals)
High S/N ratio of 50 dB
Through-the-lens auto tracking white lalance
changeable C/CS lens mount allows selection from a wide range of lenses.

TK-C420E 24V AC/12 V DC TK C400E 24 V AC/12 V DC

TK-C421EG 220 V -240 V AC TK-C401EG 220 V- 240 V AC

TK- C420E/ TK 421 EG

High- resolution 1/3 inch Interline transfer (IT) CCD with 440K pixels ( 470 TV lines horizontal resolution)

TK- C420E/ TK 421 EG

High- resolution 1/3 inch Interline transfer (IT) CCD with 440K pixels ( 290K pixels with no image lag or distortion (0.9 lux at F1.2)

Both TK-C420E and TK-400E

Digital Signal processor automatically adjusts parameters to ensure sharp, natural colour pictures in a wide range of lighting conditions, even near total darkness.
Automatic gain control (AGC) adjusts gain as ambient light sensitivity changes for fully exposed pictures even at 1.5 lux (TK-C420E) and 0.9 lux (TK-C400E).
White balance is adjusted either automatically (Auto-white) or manually over colour temperature range from2,900K, 8,000K, assuring accurate rendition under varying lighting conditions.
Queit signal to noise ratio of 48 dB.
Wide range detail enhancement in both horizontal and vertical; dual edged with 2H line memory.

TK-C1360BE 24 V AC / 12 V DC

1/2 inch IT CCD (440 pixels)
470 TV Lines resolution
Signal to noise ratio of 48 dB
0.95 lux minumum illumination with normal shutter (at F1.2, 25 percent, AGC on)
Captures sharp images down to 0.03 lux with slow shutter
Digital signal processing (CSP) adjusts to deliver top quality pictures under difficult operating conditions:

-3-D Auto white balance

-Peak White highlight inverter

-Backlight compensation (BLC)

-Dual edge 2H detail enhancement

RS-422A control
Simple menu controls, wide range of settings, manually or via RS-422A control
Camera ID overlay for multi- camera surveillance
C or CS lens mount capability
Compact size, ruggedly built
Minimal weight just 660g
Two way power supply; AC-24 V, DC 12 V
Y/C output
One push auto white balance (AWC)

TK-C138OE 24 V AC /12 V DC

TK-C1381EG 230 V AC

1/2-inch Interline Transfer (IT) CCD
Digital, External (Full genlock) and line lock system
Contour correction
ID capability
Three-dimensional detect ATW (Auto Tracking White balance)
AGC (Automatic Gain Control) boosts sensitivity below preset light levels
Wide-range Automatic Electronic Shutter
Y/C Output Connectors
Easy Menu- driven Parameter Setting
Peak White inverter function
Backlight Compensation
C/CS Mount
AC 24 V/DC 12 V Pawer Supply

TK-S542E

(please check for world-wide availability)

JVC's advanced 1/3" CCD comprises 440,000 pixels delivering 460 lines of horizontol resolution
Minumum required illumination is just 2 lux at F1.2
S/N ratio: 46dB
Incorporates a unique digital signal processing IC for stable colour reproduction
Four types of backlight compensation modes and TTL auto-tracking white balance ensure optimum picture quality under backlit lighting conditions
Built-in chracter generator
An innovative multiplexing system feeds pictures, power, operability and easy connection. A cable length selector switch optimises functions for coaxial cable lengths up to 500 m between camera and camera control unit.

TK-N1100E 24 V AC/12 V AC

(please check for world-wide availability)

JVC's revolutionary Self-Selecting Colour or IR camera features interline- transfer system 1/3" colour CCD image sensors, delivering 460 lines of horizontal resolution with a low light sensitivity of 2 lux. The IR mode is automatically triggered when the video signal drops to a pre-determined level, thus providing crisp black and white images down to zero lux illuminance under infrared illumination, invisible to human eye. An infrared illuminator lights automatically when the black and white mode is set.

The built-in electronic shutter offers a choice of nine shutter speeds from 1/50(PAL) or 1/60 (NTSC) to 1/10,000 second with either automatic or manual setting.
The TK-N1100 has an advanced automatic gain control(AGC) function that automatically increases the camera's sensitivity when ambient light drops below a present level.
TTL auto tracking white balance adjustment accurately matches white balance with shooting conditionals. A manual override brings additional flexibility (2 axes; G-Mg and R-B).
External sync input (composite or black burst) for genlock operation is available via a BNC connector. The camera automatically switches to external sync when the reference signal is applied.

TK-C675BE

64 pre-settable posittions
Large aperture lens and highly sensitive CCD; minumum illumination 2.8 lux
High quality optical distortion compensating dome cover
16 x 4.5 to 72 mm zoom ratio; F1.2 at wide angle
Maximum 2 second zoom speed
Wide coverage angle; Horizontal 3.8 to 56 degrees, vertical 2.9 to44 degrees
360 degree endless panning
Maximum 240 degree/ second panning speed
180 degree "Auto Flip" flips the camera over by 90 degree at the tiiting limit so that tilting can continue.
One-touch auto focus capability
RS-422/RS-485 control for point to point and multi-drop connection
Machine ID up to 32
With three Preset Sequence (Auto Patrol) Mode setting 64 presettings, the TK-C675BE provides surveillance coverage of an area by panning either at random or sequentially
The Area Title function divides the space covered by a camera into sixteen units, with a 16-character ID allocated to each unit. At the touch of button the user canaccurately position the camera to view a designated area. The camera can be set up for automatic panning to constantly patrol the area under surveillance.

RM-P2580E 8 Camera Control and switching

Control Pan, Tilt, Zoom, Focus, Iris and Set-up menus on up to 8TK-C675B dome cameras independently, at a distance of up to 1.2km (3900 feet) of communication cable.
Joy-stick and Push button control.
Built-in 8 channel programmable sequential switcher, providing control of dwell times and sequence order.
Auto panning movements can be programmed for each camera.
Auto Patrol programs can be set to select from up to 8 speeds, including dwell time and sequence order.
Auto Alarm Operation:

-Alarm Priority mode interrupts pre-programmed operations to view a scene associated to the alarm activated. Visual and audio alarms canbe activated, as well as triggering peripheral equipment.

-Manual Priority mode displays the camera ID of the affected pre-set camera areas, and allows one touch positioning to those areas.

Control of Area title function, allocates a 16 character ID of the affected pre-set camera areas, and allows one touch positing to those areas.
one Push Auto Focus.
Operation Lock function disables joystick and keypad to prevent operation errors.
Remote Control Interfaces: RS-485 for camera, RS-232C for external units such as Timelapse VTR or frame switcher.
8 video inputs with additional 8 loop through outputs.

TK-S241E 24 V AC/12 V DC TK-S340EG 220-240 V AC

The 1/3" CCD image pick-up delivers 380 lines of horizontal resolution, and is supported by built-in contour and AGC circuits for sharp pictures at just 0.095 lux
High-sensitivity, low after-image and low geometric distortion various systems
Simply flip a switch to select internal, external, or line lock synchronisation( requires 50 Hz AC power). This makes system iris or a lens without an iris is used.
Built-in backlight compensation function improves image quality when shooting backlit subjects.
Either C-mount or CS-mount lens can be attached to the camera with the lens mount change function.
High-quality CCD imaging or high sensitivity: 1/3" CCD image pick-up delivers 380 lines of horizontal resolution, with built-in contour and AGC circuits for sharp, Distortion, Free pictures or 0.3 lux
Accepts 220-240 V AC
Easy system integration: simply flip a switch to select internal, external, or line ock synchronisation(requires 50 Hz AC power)
Automatic Electronic Shutter to give the correct exposure even when a manual iris or a lens without an iris in used
Built-in back-light compensation function
C or CS mount Changeable

TK-S350EG 220-240 V AC Dimensions

The 1/3" CCD image pick-up delivers 560 lines of horizontal resolution, and is supported by built-in contour and AGC circuits for sharp pictures at just 0.3 lux.
High-sensitivity, low after-image and low geometric distortion required.
The camera accepts 220 V to 240 V AC power.
A switch to select internal, External, or line makes system integration even easier.
The Automatic Electronic Shutter continuosly adjusts the shutter speed to give the correct exposure even when a manual iris or a lens without an iris is used.
Built-in backlight compensaton function improves image quality when shooting backlit subjects.
Either C-mount or CS-mount lens can be attached to the camera with the lens mount change function.